How To Move A Pool Table Without Breaking The Slate
Do you plan on packing and moving your pool table when shifting to a new home on the Gold Coast? Then you need to get help as pool tables are very heavy and weigh between 500-1000 pounds.
Your pool tables also have slates attached to them which make up at least 30% of the weight, and thus you need to be careful when moving them.
The best way to go about this is by hiring budget removalists in Gold Coast who use proper techniques to disassemble, pack and load your slate pool table. However, if you are on a tight budget, you can follow the steps below and ask a few friends to help you move your pool table.
A standard pool table is around 8 or 9 feet long and weighs about 1000 pounds. You can check the weight of your table below and see whether you should do a DIY move or hire removalists Gold Coast to help you:
Now that you have seen how heavy your slate pool table is, you must keep the following things in mind before moving heavy furniture. Once you go through these tips, you can start packing and moving your pool table in the following ways
Removalist experts Gold Coast recommend that you start your move by first arranging the necessary supplies like:
You should stock up on these necessary tools and set the foundation for a damage-free, smooth, successful pool table relocation. Focus on using quality equipment and packing tools for the safety of the slate.
In a DIY move, you will need to hire a rental truck for moving your pool table as it is too big and heavy to fit in your normal vehicle. To keep your pool table safe on your rental truck, you should also know all the rules for transporting heavy loads in Queensland.
Do not forget to check the dimensions of your moving truck to ensure the slate can fit without causing any damage during transportation. Plus, consider renting a moving vehicle with a hydraulic lift and loading ramp. This will make the loading and unloading process easier and safer.
It is good to take enough time to find the right size of rental truck that will protect your precious pool table and slate throughout the journey. This will give you peace of mind and happiness.
Before you start disassembling and moving your pool table, you must measure your doorways. This will help you see which areas it can fit through and then write down the path you should take. Ensure you also protect your floors and leave all doors open to give proper access to entryways when moving your pool table.
Tip:
You should also use the following tips to protect your floors when moving your pool table.
Now, you should start taking apart your pool table, so it is easier to carry and load onto your truck. It is also a good idea to refer to your user manual for help in disassembling your pool table. You should first use your staple remover to take off the staples and remove the ball pockets. Place these in separate bags with labels, so you know where to locate them when assembling your pool table.
Next, take your socket wrench and remove the bolts of your table rails slowly. Be careful when you reach the edges of the rails, and remove them carefully so they do not get damaged or injure you.
Tip:
Here are some other useful ways you can prevent moving day injuries.
Now, you will have to peel off the felt material from the top of the table as it is often glued on. If the felt has been stapled on, you can use your screwdriver to remove the staples and slowly remove the felt.
If you have a three-piece slat table, the slates will often be screwed into each other, and thus you need to use your drill to take them apart. Make sure you do not break the slate, as it can cost you up to $15 per square foot to replace each slate sheet. If this seems too dangerous, you can always hire removalists Gold Coast to handle this process.
Lastly, you should place the table upside down and remove the screws of the table legs. Once all the legs have been removed, wrap the legs with bubble wrap and label them.
Make sure you take sufficient time and avoid rushing during the process to prevent legs from getting damaged. It is important to handle the table legs with extreme care and maintain the integrity of your pool table during the process. You can also hire professional removalists Gold Coast for safe and sound relocation of your furniture items.
Next, you must wrap each part with moving blankets and bubble wrap before securing it on the rental truck. In the case of your slates, you need to be very careful and use the following tips before loading them on the truck:
Once you have secured all the parts on the truck, you can transport them to your new home in Gold Coast. You can then reassemble your pool table in the same manner you disassembled them, and make sure you place the middle slate before the top or lower one to keep the balance. You should also use a carpenter’s level to see if the sides are at the same level and then glue it back together.
Caution:
If you follow the above tips, you can move your pool table without breaking the slate. You must disassemble the pieces before moving the table, or else it will be too heavy. If you are shifting the table within your home, you can keep it assembled and use dollies or furniture sliders to wheel it over a short distance.
